Angular Hall Encoder
Showing all 7 results
-
iC-MA
Angular Hall Encoder cascadable, with 8 bit resolution.Features
Resolution of 64, 128 and 256 positions within 360°.Rotation speed of up to 60,000rpm.Outputs configurable to provide analog and digital signals.Fail signal for low magnetic strength.Cascading multiple iC-MAs allows the use of a single bus.Enable input for low power standby.Small DFN10 package (4x4x1mm).Wide operating temperature range of -40 to +125°C.Datasheets
Manufacturer: iCHaus GmbH -
iC-MH
12 Bit Angular Hall Encoder with commutation and incremental outputs.Features
Real-time system using tracking principle for up to 120,000 rpm.Integrated hall sensors with automatic offset compensation.4-fold sensor arrangement for displacement tolerant assembly.Gain control for constant output amplitude.Interpolator with 4096 angular steps per turn (0.1° resolution).Programmable resolution, hysteresis, edge control, zero position and rotational direction.Incremental outputs with edge frequency up to 8 MHz.RS422 outputs with AB quadrature signals with index.Commutation signals U, V, W for brushless dc motors.Serial interface for absolute output and programming.SSI compatible output mode.Integrated zapping diodes for device setup and OEM data, programmable via serial interface.Error output for faulty signals (loss of magnet, frequency error); error codes accessible via serial interface.Temperature range -40 to +125°C.Datasheets
Manufacturer: iCHaus GmbH -
iC-MH8
12 Bit Angular Hall Encoder with Sin/Cos Outputs.Features
Real-time system using tracking principle for up to 120,000 rpm.Integrated hall sensors with automatic offset compensation.4-fold sensor arrangement for displacement tolerant assembly.Gain control for constant output amplitude.Interpolator with 4096 angular steps per turn (0.1° resolution).Programmable resolution, hysteresis, edge control, zero position and rotational direction.Incremental outputs with edge frequency up to 8 MHz.RS422 outputs with AB quadrature signals with index.Commutation signals U, V, W for brushless dc motors.Serial interface for absolute output and programming.SSI compatible output mode.Integrated zapping diodes for device setup and OEM data, programmable via serial interface.Error output for faulty signals (loss of magnet, frequency error); error codes accessible via serial interface.Temperature range -40 to +125°C.Datasheets
Manufacturer: iCHaus GmbH -
iC-MH16
12 Bit Angular Hall Encoder.Features
Real-time system for full resolution at up to 200,000 rpm.Integrated Hall sensors with automatic offset compensation.4x sensor arrangement for fault-tolerant adjustment.Amplitude control for optimum operating point.FlexCount® interpolator with 1 to 1024CPR, resolution up to 4096 / 0.08°.UVW commutation signals with 1 to 16CPR, for motors of up to 16 pole pairs.Programmable resolution, hysteresis, edge spacing, zero position and rotating direction.Up to 16MHz incremental edge rate.RS422-compatible AB encoder signals with index Z.BiSS/SSI interface for data output and configuration.Integrated Zapping ROM for default setup and OEM data.Errors signalized via pin and serial interface.Single 5V supply with reversed-polarity monitoring and sub-system switching.Extended temperature range from -40 to +125°C.Datasheets
Manufacturer: iCHaus GmbH -
iC-MHA
Angular Hall Encoder with SIN/COS outputs.Features
Sine ⁄ cosine differential outputs.Automatic gain control for 1Vpp differential signal amplitude.Operating speed from DC to 20 000 rpm.Loss-of-magnet detection and error messaging.Differential sine and cosine output signals.Magnetic rotation speed up to 20,000 rpm.Low output offset supporting 10bit interpolation accuracy.Reasonable alignment tolerance.Automatic gain control for 0.8 to 1.2Vpp output signal.Loss of magnet detection and error message indication.Extended temperature range of -40 to +125°C.Datasheets
Manufacturer: iCHaus GmbH -
iC-MHL200
12-Bit Linear / Rotary Position Hall Encoder.Features
Real-time system for linear speed up to 8m/s at full resolution.Absolute position within the magnetic period of 4mm.12-bit interpolation w. 4096 increments, resolution <1μm.Automatic signal offset compensation.Automatic amplitude control for optimum operating point.Programmable features: interpolation factor, hysteresis, minimum phase distance, zero position and code direction.Electronic index generation with multi purpose enable input.RS422-compatible A/B/Z outputs for encoder quadrature signals with up to 8MHz edge rate.Serial I/O interface for high-speed data output (BiSS/SSI) and configuration (BiSS).Zener-Zap ROM for non-volatile set-up and OEM data.Signal monitoring: loss of signal, excessive frequency.Single 5V supply.Extended temperature range of -40 to +125°C.Datasheets
Manufacturer: iCHaus GmbH -
iC-MHM
14-Bit Absolute Angle Hall Encoder.Features
Integrated Hall sensor array for fault-tolerant assembly.Signal stabilization by auto-gain with monitoring.Compensation of misalignment by optional fine-calibration.Absolute resolution of 0.08°.Selectable resolution and tracking rate (e.g. 12bit at <80,000rpm).Adjustable zero position and code direction.Diff. current-limited sin/cos outputs (1Vpp to 100Ω).BiSS Interface for CRC-secured position and programming.Compatible to BiSS-C profiles (BP1, BP3) and SSI.Integrated RS422 transceiver for up to 10Mbit/s (at 5V).Higher data rates supported by LVDS compatibility.System monitoring via BiSS error/warning bits.Multi-turn data processing for up to 24bit (SSI interface).Command/pin-triggered position preset for ST/MT data.3 GPIO pins for system control, incr. and test signals.Pin-selectable SPI operation.Open-drain error message output<.CRC-protected set-up from I2C EEPROM.Extended temperature range from -40 to +125°C.Reverse-polarity and short-circuit-proof interfacing pins.Datasheets
Manufacturer: iCHaus GmbH