Sin/Cos Signal Conditioner

Showing all 3 results

  • iC-MSA

    Sin/Cos Signal Conditioner with AGC and 1Vpp Driver.

    Features

    Differential or single-ended inputs for up to 20kHz.
    Selectable adaptation to voltage or current signals.
    Input multiplexers for flexible signal-to-channel assignment.
    Programmable instrumentation amplifiers.
    Signal conditioning for offset, amplitude and phase.
    Automatic gain control with monitoring.
    Short-circuit-proof analog output drivers (1Vpp to 100Ω).
    Immune against faulty output or supply connections.
    Reverse polarity protection of the sub-system by power switch.
    Adjustable thermal overload protection.
    Monitoring functions with configurable error masking.
    Alarm indication output.
    Device setup from serial EEPROM (shared with iC-MSB).
    Footprint compatible to iC-MSB.
    Single 5V operation, from -40°C to +115°C.

    Datasheets

    iC-MSA Datasheet
    Demo Board MSA1D Datasheet
     
    Manufacturer: iCHaus GmbH
     
    Read more

  • iC-MSB & iC-MSB2

    Sin/Cos Signal Conditioner with 1Vpp driver.

    Features

    Flexible pin assignment due to signal path multiplexers.
    Differential and single-ended PGA-in.
    Variable input resistance grants current/voltage conversion.
    Signal conditioning for offset, amplitude and phase.
    Short-circuit-proof analog output drivers (1Vpp to 100Ω).
    Controlled 50mA current source as LED or MR bridge supply grants stabilized output signal levels.
    Device setup from serial EEPROM.
    Signal and system monitoring with configurable alarm output.
    Sub-system power switch offers reverse polarity protection for the overall system.
    Immune against faulty output or supply connections.
    Version iC-MSB suitable for SAFETY applications.
    Version iC-MSB2 with output multiplexer (not for SAFETY).

    Datasheets

    iC-MSB Datasheet
    Demo Board MSB1D Datasheet
     
    Manufacturer: iCHaus GmbH
     
    Read more

  • iC-TW3

    Sin/Cos Signal Conditioner with 1Vpp driver and integrated temperature compensation.

    Features

    Fully differential 3-channel signal conditioning.
    Differential ⁄ single-ended PGA-in.
    Overall gain of -3 to 57dB, adjustable in steps of 0.08dB.
    Output referred offset range of ±1.2V, adjustable in steps of 2mV.
    Signal bandwidth to 1MHz and in ⁄ out latency below 1µs.
    Selectable automatic gain and offset control for encoder applications.
    On-/off-chip temperature sensing.
    Short-circuit-proof 1Vpp ⁄ 2Vpp output drivers to 100Ω.
    Temperature drift compensation for gain and offset via programmable look-up-tables.
    I²C interface to restore device setup from serial EEPROM.
    Bidirectional 1-wire interface for direct RAM and EEPROM access.
    Optical setup link via 1-wire interface operating a photo receiver.
    Single 3.0V to 5.5V supply.
    Extended operating temperature range of –40 to +125°C.

    Datasheets

    iC-TW3 Datasheet
    Demo Board TW32D Datasheet
     
    Manufacturer: iCHaus GmbH
     
    Read more