24V

Showing all 7 results

  • iC-HD2

    Quad Differential Line Driver pin-compatible with xx2068.

    Features

    Complementary short-circuit-proof push-pull driver stages for RS422 and 24V applications up to 2MHz.
    Pin-compatible with xx2068.
    Integrated line adaptation for high signal quality at 24V.
    High driving capability of typically 200mA at 24V.
    Output saturation of just 0.3V at 40mAdc.
    Tristate function with excessive temperature.
    Moderate slew rate reduces EMI.
    Error messaging with excessive temperature and undervoltage.
    TTL- ⁄ CMOS-compatible Schmitt trigger inputs, voltage-proof to 40V.
    Tristate function for bus applications.
    Integrated 5V regulator for 5mA.
    4.5 to 35V single supply operation with low static power dissipation.
    Operating temperature from -25 to 125°C (-40°C is optional).

    Datasheets

    iC-HD2 Datasheet
     
    Manufacturer: iCHaus GmbH
     
    Read more

  • iC-HD7

    Quad Differential Line Driver pin-compatible with xx7272.

    Features

    Complementary short-circuit-proof push-pull driver stages for RS422 and 24V applications up to 2MHz.
    Integrated line adaptation for high signal quality at 24V.
    Moderate slew rate reduces EMI.
    High driving capability of typically 200mA at 24V.
    Output saturation of just 0.3V at 40mAdc.
    Pin-compatible with 26LS31, xx7272.
    Tristate function for bus applications with excessive temperature shutdown.
    TTL- ⁄ CMOS-compatible Schmitt trigger inputs, voltage-proof to 40V.
    4.5 to 35V single supply operation with low static power dissipation.
    Operating temperature from -25 to 125°C (-40°C is optional).

    Datasheets

    iC-HD7 Datasheet
     
    Manufacturer: iCHaus GmbH
     
    Read more

  • iC-HE

    Triple Differential Line Driver.

    Features

    Complementary short-circuit-proof push-pull driver stages for RS422 and 24 V applications up to 2 MHz.
    Integrated line adaptation for high signal quality at 24 V.
    High driving capability of typically 200mA at 24V.
    Output saturation of just 0.3V at 40mA dc.
    Tristate function with excessive temperature.
    Moderate slew rate reduces EMI.
    TTL-/CMOS-compatible Schmitt trigger inputs, voltage-proof to 40V.
    4.5 to 35 V single supply operation with low static power dissipation.
    Operating temperature from -25 to 125°C (-40°C is optional).
    50 mA LED driver with ISET input for current control.

    Datasheets

    iC-HE Datasheet
     
    Manufacturer: iCHaus GmbH
     
    Read more

  • iC-HF

    6 Channel RS-422 Encoder Link – Line Driver/Receiver.

    Features

    Versatile 3+3 ch. RS-422 line driver/receiver.
    Pin-out as 6-ch. driver, or 3+3/4+2-ch. driver/receiver.
    Supports BiSS bus structure and bus loop-back.
    Unique analogue switches to bridge 9 lines.
    Differential short-circuit-proof push-pull outputs.
    Source/sink driving capability of 30mA at 3V.
    Lower EMI due to output mA limitation.
    Under-volt and over-temp protection.
    Suits various line impedances, allows 100 Ohm termination.
    TTL-compatible hysteresis inputs.
    Up to 10 MHz input/output frequency.
    Open-drain error message output (NERR).
    Reverse-polarity-proof operation from 3.0 V to 5.5 V.
    Reverse-pol. protection of periphery by supply-switch (60mA).
    Operating temperature range of -40°C to +125°C.

    Datasheets

    iC-HF Datasheet
    Demo Board HF1D Datasheet
     
    Manufacturer: iCHaus GmbH
     
    Read more

  • iC-HX

    3-Channel Differential Line Driver with reduced power dissipation.

    Features

    6 current-limited and short-circuit-proof push-pull drivers.
    Differential 3-channel operation selectable.
    Impedance adaption for 30 to 140Ω.
    Power supply range from 4 to 40V.
    200 mA output current (at VB = 24V).
    Low output saturation voltage (< 0.4V at 30mA).
    Compatible with TIA⁄EIA standard RS-422.
    Tristate switching of outputs enables use in buses.
    Low static power dissipation.
    Short switching times and high slew rates.
    Dynamic power dissipation reduced with iC-xSwitch.
    Schmitt trigger inputs with pull-down resistors, TTL and CMOS compatible; voltage-proof up to 40V.
    Thermal shutdown with hysteresis.
    Error message trigger input TNER.
    Open-drain error output NER, for over-temperature and under-voltage.
    Option: Extended temperature range from -40 to 125°C.

    Datasheets

    iC-HX Datasheet
     
    Manufacturer: iCHaus GmbH
     
    Read more

  • iC-VX

    3-Channel Differential Line Driver with complementary 24V outputs.

    Features

    Driver supply voltage of 4.5 to 30V.
    Push-pull driver current-limited and short-circuit-proof.
    Programmable driving capability of 30mA or 100mA.
    Integrated freewheeling diodes.
    TTL- ⁄ CMOS-compatible hysteresis inputs with pull-up current sources.
    Selectable input reference level.
    Thermal shutdown.
    ESD protection.

    Datasheets

    iC-VX Datasheet
     
    Manufacturer: iCHaus GmbH
     
    Read more

  • iC-WE

    3-Channel 75Ω Line Driver eliminates line reflections in RS422 and 24V applications.

    Features

    Driver supply voltage of 4.5 to 30V.
    Push-pull driver current-limited and short-circuit-proof.
    Guaranteed driving capability of 30mA.
    Integrated cable adaption with thermal protection.
    Tri-state and invert mode.
    TTL- ⁄ CMOS-compatible hysteresis inputs with pull-up sources.
    Meets EIA standard RS422 (with two iCs used).
    Error output with thermal shutdown and low voltage.
    ESD protection and integrated free-wheeling diodes.

    Datasheets

    iC-WE Datasheet
     
    Manufacturer: iCHaus GmbH
     
    Read more