Light-Grid Pulse Receiver

Showing all 3 results

  • iC-ME

    2-Channel Light-Grid Pulse Receiver for safety light curtains.

    Features

    Dual photo diode inputs with photoelectric amplifier.
    Built-in bandpass filter with 300 kHz center frequency.
    Differential current-signal output with open drain low-side drivers.
    Nonlinear transfer function results in wide dynamic range of 100nA to 1.5mA for pulsed photocurrents.
    Fast flash recovery time of max. 30µs.
    Recovery time below 10µs for excessive photocurrents of up to 1.8 mA.
    Shift register and control logic.
    Compatible to CMOS levels.
    Single 5 V supply.
    Low standby current; circuit activation by input data.
    Power-down reset.
    ESD protection.
    FMEA driven circuit and layout topology .
    Suited for high-risk applications according to IEC 61496-1.
    Option: extended temperature range of -25 to 85°C.

    Datasheets

     
    Manufacturer: iCHaus GmbH
     
  • iC-NE

    Light-Grid Pulse Receiver for light curtains, light barriers and ESPE use.

    Features

    Photoelectric amplifier adapted to standard photodiodes.
    Built-in band-pass filter with 300kHz center frequency.
    Differential current-signal output.
    Wide dynamic range of 100nA to 1.5mA for pulsed photocurrents.
    Three stage shift register and control logic.
    Compatible with CMOS levels.
    Low standby current.
    Power-down reset.
    ESD protection.
    Suited for high-risk applications according to IEC 1496-1.

    Datasheets

     
    Manufacturer: iCHaus GmbH
     
  • iC-NK

    Light-Grid Pulse Receiver.

    Features

    Photoelectric amplifier with integrated bandpass.
    Processing of light pulses up to 1MHz.
    Differential current-signal output with open drain low-side drivers.
    Non-linear transfer function results in wide dynamic range of 0.3 μA to 1.8mA for pulsed photo currents.
    Fast recovery time of 0.5 μs within dynamic range.
    System function tolerant versus flash lights.
    2-step shift register and control logic.
    Compatible to CMOS levels.
    Single 5 V supply.
    Low standby current; circuit activation by input data.
    Power-down reset.
    ESD protection.
    Option: extended temperature range of -20 to 85°C.

    Datasheets

     
    Manufacturer: iCHaus GmbH